4ch Passive Video Balun Transmitter/Receiver

This deviceis capable of receiving and transmitting video signal over UTP cable

Working with passive transceiver and active transmitters allow signals transmission up to 330m and 1500m respectively.
The unparalleled interference rejection and low emissions of the UTP allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits.

This 4 Channel Video Balun allows the use of a shared or existing cable plant.

Video balun is to convert the video signal into the balanced signal applicable to be transmitted on common Cat-5 unshielded twisted pair wire with perfect transmission effect, which can be applied in the occasions such as video monitoring and video meeting and can transmit four channels of video image simultaneously on an 8-core Cat-5 twisted pair wire.

Video Balun Transceiver can simplify the wiring project and save wire use quantity.

• Specs - 4ch Passive Video Balun Transmitter/Receiver
• Frequency response: DC-6Mhz Common-mode/Differential-mode
• Rejection: 15khz  C6Mhz 60dB type
• Audio/data - NO
• Power - N/A
• Impedance - Coax, male BNC:75 Ohm¸ UTP (Screwless) Terminal Block or UTP RJ45 Data Connector 100 Ohm
• Wire type - One Unshielded Twisted Pair 24-16AWG (0.5-1.31mm) Per video signal: DC Loop Resistance 52 ohms per 1,000ft (18 ohms per 100m)
• Surge suppression - 6000V
• Control/Adjust - N/A
• UTP Port - RJ45 or Terminal Block
• Dimensions (mm) - 102mm x 80mm 26mm
• Weigth (g) - 198g
• Environment - Temperature:-10~+50 degrees C,  Humidity:0~95%